00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Attwood Marine
Attwood Gas Spring 36.3 x 21 C 80# 13mm #SL29-80-1
$29.49
$38.22
Attwood Marine SL29-80-1 Gas Springs
Ni-Slide Series Attwood gas springs are made with bio-degradable no hazzard to water grade oil (WGK), making them the marine industry's most environmentlly friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Attwood gas springs come has many configurations to fit your needs including: marine, industrial, agricultural, pharmacuetical, food processing, and medical. Available in 6mm, 8mm and 10mm configurations between 10 and 100 pound output force.
The Ni-Slide series carries Attwood's widest selection of configurations and lengths. These gas springs are the industry's proven leader in value, quality and durability.
Gas Springs: OEM Gas SpringsOutput Force: 80 PoundsExtended: 36.30 InchesProduct Series: Ni-SlideCompressed: 21.10 InchesStroke: 15.20 InchesEnd Type: 13mm SocketShock Size: 10mm Rod x 22mm Cylinder
Alternate part number: SL-29-80-1, Spring Lift
Specifications:
Important Notice: Gas Spring Disposal Do not discard oil-filled Gas Springs!
It is easy to drain this hydraulic oil and recycle it in the same manner as motor oil or transmission fluid.
Follow these instructions to remove the oil:
Gas Springs are under pressure. Work carefully and wear eye protection!
Clamp Gas Spring in a vise.
Screen off the work area to deflect escaping gas and oil splashes. Have a container ready to collect oil.
Use a 1/8" (3mm) drill bit to drill a hole 3/4" (20mm) from bottom end of the Gas Spring. Hole must be 3/8" (10mm) deep.
Drain oil by pumping the piston rod in and out several times.
Collect and dispose of the oil and Gas Spring according to local disposal and environmental regulations.
Normalized SKU: SL29801UPC Code: 715584298018Search Key: ATT-SL29-Package Type: Bulk - Not packaged
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Attwood Marine
Attwood Gas Spring 10 lb 7.5 6 x 15 B and S #SL11-10-1
$29.49
Attwood Marine SL11-10-1 Gas SpringsNi-Slide Series Attwood gas springs are made with bio-degradable no hazzard to water grade oil (WGK), making them the marine industry's most environmentlly friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Attwood gas springs come has many configurations to fit your needs including: marine, industrial, agricultural, pharmacuetical, food processing, and medical. Available in 6mm, 8mm and 10mm configurations between 10 and 100 pound output force.The Ni-Slide series carries Attwood's widest selection of configurations and lengths. These gas springs are the industry's proven leader in value, quality and durability.Gas Springs: OEM Gas SpringsOutput Force: 10 PoundsExtended: 7.50 InchesProduct Series: Ni-SlideCompressed: 5.25 InchesStroke: 2.25 InchesEnd Type: 10mm SocketShock Size: 6mm Rod x 15mm CylinderAlternate part number: SL-11-10-1, Spring LiftSpecifications:Important Notice: Gas Spring Disposal Do not discard oil-filled Gas Springs!It is easy to drain this hydraulic oil and recycle it in the same manner as motor oil or transmission fluid.Follow these instructions to remove the oil:
Gas Springs are under pressure. Work carefully and wear eye protection!
Clamp Gas Spring in a vise.
Screen off the work area to deflect escaping gas and oil splashes. Have a container ready to collect oil.
Use a 1/8" (3mm) drill bit to drill a hole 3/4" (20mm) from bottom end of the Gas Spring. Hole must be 3/8" (10mm) deep.
Drain oil by pumping the piston rod in and out several times.
Collect and dispose of the oil and Gas Spring according to local disposal and environmental regulations.
Normalized SKU: SL11101UPC Code: 022697111012Search Key: ATT-SL11-Package Type: Bulk - Not packaged
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Attwood Marine
Attwood Gas Spring 30 lb 36.3 Extended 21.1 Compressed #SL29-30-1
$29.49
$31.60
Attwood Marine SL29-30-1 Gas Springs
Ni-Slide Series Attwood gas springs are made with bio-degradable no hazzard to water grade oil (WGK), making them the marine industry's most environmentlly friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Attwood gas springs come has many configurations to fit your needs including: marine, industrial, agricultural, pharmacuetical, food processing, and medical. Available in 6mm, 8mm and 10mm configurations between 10 and 100 pound output force.
The Ni-Slide series carries Attwood's widest selection of configurations and lengths. These gas springs are the industry's proven leader in value, quality and durability.
Gas Springs: OEM Gas SpringsOutput Force: 30 PoundsExtended: 36.30 InchesProduct Series: Ni-SlideCompressed: 21.10 InchesStroke: 15.20 InchesEnd Type: 13mm SocketShock Size: 10mm Rod x 22mm Cylinder
Alternate part number: SL-29-30-1, Spring Lift
Specifications:
Important Notice: Gas Spring Disposal Do not discard oil-filled Gas Springs!
It is easy to drain this hydraulic oil and recycle it in the same manner as motor oil or transmission fluid.
Follow these instructions to remove the oil:
Gas Springs are under pressure. Work carefully and wear eye protection!
Clamp Gas Spring in a vise.
Screen off the work area to deflect escaping gas and oil splashes. Have a container ready to collect oil.
Use a 1/8" (3mm) drill bit to drill a hole 3/4" (20mm) from bottom end of the Gas Spring. Hole must be 3/8" (10mm) deep.
Drain oil by pumping the piston rod in and out several times.
Collect and dispose of the oil and Gas Spring according to local disposal and environmental regulations.
Normalized SKU: SL29301UPC Code: 715584293013Search Key: ATT-SL29-Package Type: Bulk - Not packaged
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Attwood Marine
Attwood Gas Spring 10mm 16" x 28" Socket 30# #SL27-30-1
$29.49
$37.15
Attwood Marine SL27-30-1 Gas SpringsNi-Slide Series Attwood gas springs are made with bio-degradable no hazzard to water grade oil (WGK), making them the marine industry's most environmentlly friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Attwood gas springs come has many configurations to fit your needs including: marine, industrial, agricultural, pharmacuetical, food processing, and medical. Available in 6mm, 8mm and 10mm configurations between 10 and 100 pound output force.The Ni-Slide series carries Attwood's widest selection of configurations and lengths. These gas springs are the industry's proven leader in value, quality and durability.Gas Springs: OEM Gas SpringsOutput Force: 30 PoundsExtended: 28.00 InchesProduct Series: Ni-SlideCompressed: 16.50 InchesStroke: 11.50 InchesEnd Type: 10mm SocketShock Size: 10mm Rod x 22mm CylinderAlternate part number: SL-27-30-1, Spring LiftSpecifications:Important Notice: Gas Spring Disposal Do not discard oil-filled Gas Springs!It is easy to drain this hydraulic oil and recycle it in the same manner as motor oil or transmission fluid.Follow these instructions to remove the oil:
Gas Springs are under pressure. Work carefully and wear eye protection!
Clamp Gas Spring in a vise.
Screen off the work area to deflect escaping gas and oil splashes. Have a container ready to collect oil.
Use a 1/8" (3mm) drill bit to drill a hole 3/4" (20mm) from bottom end of the Gas Spring. Hole must be 3/8" (10mm) deep.
Drain oil by pumping the piston rod in and out several times.
Collect and dispose of the oil and Gas Spring according to local disposal and environmental regulations.
Normalized SKU: SL27301UPC Code: Search Key: ATT-SL27-Package Type: Bulk - Not packaged
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Attwood Marine
Attwood Gas Spring 60 lb Extended 20" Compressed 12" #SL34-60-5
$21.81
$29.32
Attwood Marine SL34-60-5 Gas SpringsNi-Slide Series Attwood gas springs are made with bio-degradable no hazzard to water grade oil (WGK), making them the marine industry's most environmentlly friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Attwood gas springs come has many configurations to fit your needs including: marine, industrial, agricultural, pharmacuetical, food processing, and medical. Available in 6mm, 8mm and 10mm configurations between 10 and 100 pound output force.The Ni-Slide series carries Attwood's widest selection of configurations and lengths. These gas springs are the industry's proven leader in value, quality and durability.Gas Springs: Aftermarket Gas SpringsOutput Force: 60 PoundsExtended: 20.00 InchesProduct Series: Ni-SlideCompressed: 12.00 InchesStroke: 8.00 InchesEnd Type: 10mm SocketShock Size: 8mm Rod x 18mm CylinderAlternate part number: SL-34-60-5, Spring LiftSpecifications:Important Notice: Gas Spring Disposal Do not discard oil-filled Gas Springs!It is easy to drain this hydraulic oil and recycle it in the same manner as motor oil or transmission fluid.Follow these instructions to remove the oil:
Gas Springs are under pressure. Work carefully and wear eye protection!
Clamp Gas Spring in a vise.
Screen off the work area to deflect escaping gas and oil splashes. Have a container ready to collect oil.
Use a 1/8" (3mm) drill bit to drill a hole 3/4" (20mm) from bottom end of the Gas Spring. Hole must be 3/8" (10mm) deep.
Drain oil by pumping the piston rod in and out several times.
Collect and dispose of the oil and Gas Spring according to local disposal and environmental regulations.
Normalized SKU: SL34605UPC Code: 715584034609Search Key: ATT-SL34-Package Type: Aftermarket Packaging
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Attwood Marine
Attwood Gas Spring 40 lb 36.3 Extended 21.1 Compressed #SL29-40-1
$24.68
$37.46
Attwood Marine SL29-40-1 Gas Springs
Ni-Slide Series Attwood gas springs are made with bio-degradable no hazzard to water grade oil (WGK), making them the marine industry's most environmentlly friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Attwood gas springs come has many configurations to fit your needs including: marine, industrial, agricultural, pharmacuetical, food processing, and medical. Available in 6mm, 8mm and 10mm configurations between 10 and 100 pound output force.
The Ni-Slide series carries Attwood's widest selection of configurations and lengths. These gas springs are the industry's proven leader in value, quality and durability.
Gas Springs: OEM Gas SpringsOutput Force: 40 PoundsExtended: 36.30 InchesProduct Series: Ni-SlideCompressed: 21.10 InchesStroke: 15.20 InchesEnd Type: 13mm SocketShock Size: 10mm Rod x 22mm Cylinder
Alternate part number: SL-29-40-1, Spring Lift
Specifications:
Important Notice: Gas Spring Disposal Do not discard oil-filled Gas Springs!
It is easy to drain this hydraulic oil and recycle it in the same manner as motor oil or transmission fluid.
Follow these instructions to remove the oil:
Gas Springs are under pressure. Work carefully and wear eye protection!
Clamp Gas Spring in a vise.
Screen off the work area to deflect escaping gas and oil splashes. Have a container ready to collect oil.
Use a 1/8" (3mm) drill bit to drill a hole 3/4" (20mm) from bottom end of the Gas Spring. Hole must be 3/8" (10mm) deep.
Drain oil by pumping the piston rod in and out several times.
Collect and dispose of the oil and Gas Spring according to local disposal and environmental regulations.
Normalized SKU: SL29401UPC Code: 022697294012Search Key: ATT-SL29-Package Type: Bulk - Not packaged
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Attwood Marine
Attwood Gas Spring 40 lb Extended 17.2" Compressed 10.2" #SL36-40-5
$30.94
Attwood Marine SL36-40-5 Gas SpringsNi-Slide Series Attwood gas springs are made with bio-degradable no hazzard to water grade oil (WGK), making them the marine industry's most environmentlly friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Attwood gas springs come has many configurations to fit your needs including: marine, industrial, agricultural, pharmacuetical, food processing, and medical. Available in 6mm, 8mm and 10mm configurations between 10 and 100 pound output force.The Ni-Slide series carries Attwood's widest selection of configurations and lengths. These gas springs are the industry's proven leader in value, quality and durability.Gas Springs: Aftermarket Gas SpringsOutput Force: 40 PoundsExtended: 17.20 InchesProduct Series: Ni-SlideCompressed: 10.20 InchesStroke: 7.00 InchesEnd Type: 10mm SocketShock Size: 8mm Rod x 18mm CylinderAlternate part number: SL-36-40-5, Spring LiftSpecifications:Important Notice: Gas Spring Disposal Do not discard oil-filled Gas Springs!It is easy to drain this hydraulic oil and recycle it in the same manner as motor oil or transmission fluid.Follow these instructions to remove the oil:
Gas Springs are under pressure. Work carefully and wear eye protection!
Clamp Gas Spring in a vise.
Screen off the work area to deflect escaping gas and oil splashes. Have a container ready to collect oil.
Use a 1/8" (3mm) drill bit to drill a hole 3/4" (20mm) from bottom end of the Gas Spring. Hole must be 3/8" (10mm) deep.
Drain oil by pumping the piston rod in and out several times.
Collect and dispose of the oil and Gas Spring according to local disposal and environmental regulations.
Normalized SKU: SL36405UPC Code: 715584036405Search Key: ATT-SL36-Package Type: Aftermarket Packaging
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Attwood Marine
Attwood Gas Spring 60 lb Extended 15" Compressed 9.5" #SL33-60-5
$29.49
Attwood Marine SL33-60-5 Gas SpringsNi-Slide Series Attwood gas springs are made with bio-degradable no hazzard to water grade oil (WGK), making them the marine industry's most environmentlly friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Attwood gas springs come has many configurations to fit your needs including: marine, industrial, agricultural, pharmacuetical, food processing, and medical. Available in 6mm, 8mm and 10mm configurations between 10 and 100 pound output force.The Ni-Slide series carries Attwood's widest selection of configurations and lengths. These gas springs are the industry's proven leader in value, quality and durability.Gas Springs: Aftermarket Gas SpringsOutput Force: 60 PoundsExtended: 15.00 InchesProduct Series: Ni-SlideCompressed: 9.50 InchesStroke: 5.50 InchesEnd Type: 10mm SocketShock Size: 8mm Rod x 18mm CylinderAlternate part number: SL-33-60-5, Spring LiftSpecifications:Important Notice: Gas Spring Disposal Do not discard oil-filled Gas Springs!It is easy to drain this hydraulic oil and recycle it in the same manner as motor oil or transmission fluid.Follow these instructions to remove the oil:
Gas Springs are under pressure. Work carefully and wear eye protection!
Clamp Gas Spring in a vise.
Screen off the work area to deflect escaping gas and oil splashes. Have a container ready to collect oil.
Use a 1/8" (3mm) drill bit to drill a hole 3/4" (20mm) from bottom end of the Gas Spring. Hole must be 3/8" (10mm) deep.
Drain oil by pumping the piston rod in and out several times.
Collect and dispose of the oil and Gas Spring according to local disposal and environmental regulations.
Normalized SKU: SL33605UPC Code: 715584033602Search Key: ATT-SL33-Package Type: Aftermarket Packaging
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Attwood Marine
Attwood Gas Spring 40 lb Extended 15" Compressed 9.5" #SL33-40-5
$20.69
$29.32
Attwood Marine SL33-40-5 Gas SpringsNi-Slide Series Attwood gas springs are made with bio-degradable no hazzard to water grade oil (WGK), making them the marine industry's most environmentlly friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Attwood gas springs come has many configurations to fit your needs including: marine, industrial, agricultural, pharmacuetical, food processing, and medical. Available in 6mm, 8mm and 10mm configurations between 10 and 100 pound output force.The Ni-Slide series carries Attwood's widest selection of configurations and lengths. These gas springs are the industry's proven leader in value, quality and durability.Gas Springs: Aftermarket Gas SpringsOutput Force: 40 PoundsExtended: 15.00 InchesProduct Series: Ni-SlideCompressed: 9.50 InchesStroke: 5.50 InchesEnd Type: 10mm SocketShock Size: 8mm Rod x 18mm CylinderAlternate part number: SL-33-40-5, Spring LiftSpecifications:Important Notice: Gas Spring Disposal Do not discard oil-filled Gas Springs!It is easy to drain this hydraulic oil and recycle it in the same manner as motor oil or transmission fluid.Follow these instructions to remove the oil:
Gas Springs are under pressure. Work carefully and wear eye protection!
Clamp Gas Spring in a vise.
Screen off the work area to deflect escaping gas and oil splashes. Have a container ready to collect oil.
Use a 1/8" (3mm) drill bit to drill a hole 3/4" (20mm) from bottom end of the Gas Spring. Hole must be 3/8" (10mm) deep.
Drain oil by pumping the piston rod in and out several times.
Collect and dispose of the oil and Gas Spring according to local disposal and environmental regulations.
Normalized SKU: SL33405UPC Code: 715584033404Search Key: ATT-SL33-Package Type: Aftermarket Packaging
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Attwood Marine
Attwood Gas Spring 20 lb Extended 7.5" x Compressed 5.4" #SL31-20-1
$29.49
Attwood Marine SL31-20-1 Gas SpringsNi-Slide Series Attwood gas springs are made with bio-degradable no hazzard to water grade oil (WGK), making them the marine industry's most environmentlly friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Attwood gas springs come has many configurations to fit your needs including: marine, industrial, agricultural, pharmacuetical, food processing, and medical. Available in 6mm, 8mm and 10mm configurations between 10 and 100 pound output force.The Ni-Slide series carries Attwood's widest selection of configurations and lengths. These gas springs are the industry's proven leader in value, quality and durability.Gas Springs: OEM Gas SpringsOutput Force: 20 PoundsExtended: 7.50 InchesProduct Series: Ni-SlideCompressed: 5.25 InchesStroke: 2.25 InchesEnd Type: 10mm SocketShock Size: 8mm Rod x 18mm CylinderAlternate part number: SL-31-20-1, Spring LiftSpecifications:Important Notice: Gas Spring Disposal Do not discard oil-filled Gas Springs!It is easy to drain this hydraulic oil and recycle it in the same manner as motor oil or transmission fluid.Follow these instructions to remove the oil:
Gas Springs are under pressure. Work carefully and wear eye protection!
Clamp Gas Spring in a vise.
Screen off the work area to deflect escaping gas and oil splashes. Have a container ready to collect oil.
Use a 1/8" (3mm) drill bit to drill a hole 3/4" (20mm) from bottom end of the Gas Spring. Hole must be 3/8" (10mm) deep.
Drain oil by pumping the piston rod in and out several times.
Collect and dispose of the oil and Gas Spring according to local disposal and environmental regulations.
Normalized SKU: SL31201UPC Code: 715584312011Search Key: ATT-SL31-Package Type: Bulk - Not packaged
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Attwood Marine
Attwood Gas Spring 36.3" x 21.1" 100# 13mm #SL29-100-1
$29.49
$37.46
Attwood Marine SL29-100-1 Gas Springs
Ni-Slide Series Attwood gas springs are made with bio-degradable no hazzard to water grade oil (WGK), making them the marine industry's most environmentlly friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Attwood gas springs come has many configurations to fit your needs including: marine, industrial, agricultural, pharmacuetical, food processing, and medical. Available in 6mm, 8mm and 10mm configurations between 10 and 100 pound output force.
The Ni-Slide series carries Attwood's widest selection of configurations and lengths. These gas springs are the industry's proven leader in value, quality and durability.
Gas Springs: OEM Gas SpringsOutput Force: 100 PoundsExtended: 36.30 InchesProduct Series: Ni-SlideCompressed: 21.10 InchesStroke: 15.20 InchesEnd Type: 13mm SocketShock Size: 10mm Rod x 22mm Cylinder
Alternate part number: SL-29-100-1, Spring Lift
Specifications:
Important Notice: Gas Spring Disposal Do not discard oil-filled Gas Springs!
It is easy to drain this hydraulic oil and recycle it in the same manner as motor oil or transmission fluid.
Follow these instructions to remove the oil:
Gas Springs are under pressure. Work carefully and wear eye protection!
Clamp Gas Spring in a vise.
Screen off the work area to deflect escaping gas and oil splashes. Have a container ready to collect oil.
Use a 1/8" (3mm) drill bit to drill a hole 3/4" (20mm) from bottom end of the Gas Spring. Hole must be 3/8" (10mm) deep.
Drain oil by pumping the piston rod in and out several times.
Collect and dispose of the oil and Gas Spring according to local disposal and environmental regulations.
Normalized SKU: SL291001UPC Code: 022697291011Search Key: ATT-SL29-Package Type: Bulk - Not packaged
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Attwood Marine
Attwood Gas Spring 60 lb Extended 17.2" Compressed 10.2" #SL36-60-5
$30.94
Attwood Marine SL36-60-5 Gas SpringsNi-Slide Series Attwood gas springs are made with bio-degradable no hazzard to water grade oil (WGK), making them the marine industry's most environmentlly friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Attwood gas springs come has many configurations to fit your needs including: marine, industrial, agricultural, pharmacuetical, food processing, and medical. Available in 6mm, 8mm and 10mm configurations between 10 and 100 pound output force.The Ni-Slide series carries Attwood's widest selection of configurations and lengths. These gas springs are the industry's proven leader in value, quality and durability.Gas Springs: Aftermarket Gas SpringsOutput Force: 60 PoundsExtended: 17.20 InchesProduct Series: Ni-SlideCompressed: 10.20 InchesStroke: 7.00 InchesEnd Type: 10mm SocketShock Size: 8mm Rod x 18mm CylinderAlternate part number: SL-36-60-5, Spring LiftSpecifications:Important Notice: Gas Spring Disposal Do not discard oil-filled Gas Springs!It is easy to drain this hydraulic oil and recycle it in the same manner as motor oil or transmission fluid.Follow these instructions to remove the oil:
Gas Springs are under pressure. Work carefully and wear eye protection!
Clamp Gas Spring in a vise.
Screen off the work area to deflect escaping gas and oil splashes. Have a container ready to collect oil.
Use a 1/8" (3mm) drill bit to drill a hole 3/4" (20mm) from bottom end of the Gas Spring. Hole must be 3/8" (10mm) deep.
Drain oil by pumping the piston rod in and out several times.
Collect and dispose of the oil and Gas Spring according to local disposal and environmental regulations.
Normalized SKU: SL36605UPC Code: 715584036603Search Key: ATT-SL36-Package Type: Aftermarket Packaging
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Attwood Marine
Attwood Gas Spring 20 lb Extended 15" Compressed 9.5" #SL33-20-5
$20.69
$29.32
Attwood Marine SL33-20-5 Gas SpringsNi-Slide Series Attwood gas springs are made with bio-degradable no hazzard to water grade oil (WGK), making them the marine industry's most environmentlly friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Attwood gas springs come has many configurations to fit your needs including: marine, industrial, agricultural, pharmacuetical, food processing, and medical. Available in 6mm, 8mm and 10mm configurations between 10 and 100 pound output force.The Ni-Slide series carries Attwood's widest selection of configurations and lengths. These gas springs are the industry's proven leader in value, quality and durability.Gas Springs: Aftermarket Gas SpringsOutput Force: 20 PoundsExtended: 15.00 InchesProduct Series: Ni-SlideCompressed: 9.50 InchesStroke: 5.50 InchesEnd Type: 10mm SocketShock Size: 8mm Rod x 18mm CylinderAlternate part number: SL-33-20-5, Spring LiftSpecifications:Important Notice: Gas Spring Disposal Do not discard oil-filled Gas Springs!It is easy to drain this hydraulic oil and recycle it in the same manner as motor oil or transmission fluid.Follow these instructions to remove the oil:
Gas Springs are under pressure. Work carefully and wear eye protection!
Clamp Gas Spring in a vise.
Screen off the work area to deflect escaping gas and oil splashes. Have a container ready to collect oil.
Use a 1/8" (3mm) drill bit to drill a hole 3/4" (20mm) from bottom end of the Gas Spring. Hole must be 3/8" (10mm) deep.
Drain oil by pumping the piston rod in and out several times.
Collect and dispose of the oil and Gas Spring according to local disposal and environmental regulations.
Normalized SKU: SL33205UPC Code: 715584033206Search Key: ATT-SL33-Package Type: Aftermarket Packaging
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Attwood Marine
Attwood Gas Spring 20" x 12" C 60#Bl #SL3-60-1
$17.52
$20.91
Attwood Marine SL3-60-1 Gas SpringsThis Attwood Special Order item is only offered in a full case quantity. Attwood no longer allows for less than case quantity orders.Ni-Slide Series Attwood gas springs are made with bio-degradable no hazzard to water grade oil (WGK), making them the marine industry's most environmentlly friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Attwood gas springs come has many configurations to fit your needs including: marine, industrial, agricultural, pharmacuetical, food processing, and medical. Available in 6mm, 8mm and 10mm configurations between 10 and 100 pound output force.The Ni-Slide series carries Attwood's widest selection of configurations and lengths. These gas springs are the industry's proven leader in value, quality and durability.Gas Springs: OEM Gas SpringsOutput Force: 60 PoundsExtended: 20.00 InchesProduct Series: Ni-SlideCompressed: 12.00 InchesStroke: 8.00 InchesEnd Type: 10mm BladeShock Size: 8mm Rod x 18mm CylinderAlternate part number: SL-3-60-1, Spring LiftNormalized SKU: SL3601UPC Code: 715584036016Search Key: ATT-SL3-Package Type: Bulk - Not packaged
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Attwood Marine
Attwood Gas Spring 10" Ext 20# #SL10-20-1
$29.49
Attwood Marine SL10-20-1 Gas SpringsNi-Slide Series Attwood gas springs are made with bio-degradable no hazzard to water grade oil (WGK), making them the marine industry's most environmentlly friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Attwood gas springs come has many configurations to fit your needs including: marine, industrial, agricultural, pharmacuetical, food processing, and medical. Available in 6mm, 8mm and 10mm configurations between 10 and 100 pound output force.The Ni-Slide series carries Attwood's widest selection of configurations and lengths. These gas springs are the industry's proven leader in value, quality and durability.Gas Springs: OEM Gas SpringsOutput Force: 20 PoundsExtended: 10.00 InchesProduct Series: Ni-SlideCompressed: 7.00 InchesStroke: 3.00 InchesEnd Type: 10mm SocketShock Size: 6mm Rod x 15mm CylinderAlternate part number: SL-10-20-1, Spring LiftSpecifications:Important Notice: Gas Spring Disposal Do not discard oil-filled Gas Springs!It is easy to drain this hydraulic oil and recycle it in the same manner as motor oil or transmission fluid.Follow these instructions to remove the oil:
Gas Springs are under pressure. Work carefully and wear eye protection!
Clamp Gas Spring in a vise.
Screen off the work area to deflect escaping gas and oil splashes. Have a container ready to collect oil.
Use a 1/8" (3mm) drill bit to drill a hole 3/4" (20mm) from bottom end of the Gas Spring. Hole must be 3/8" (10mm) deep.
Drain oil by pumping the piston rod in and out several times.
Collect and dispose of the oil and Gas Spring according to local disposal and environmental regulations.
Normalized SKU: SL10201UPC Code: 022697102102Search Key: ATT-SL10-Package Type: Bulk - Not packaged
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Attwood Marine
Attwood Gas Spring 36" x 21" C 90#13mm #SL29-90-1
$31.39
$37.46
Attwood Marine SL29-90-1 Gas Springs
Ni-Slide Series Attwood gas springs are made with bio-degradable, no hazard to water grade oil (WGK), making them the marine industry's most environmentally friendly gas springs. All springs pass ASTM B117, Attwood salt spray, and a 30,000 cycle lifecycle test. Attwood gas springs come in many configurations to fit your needs, including marine, industrial, agricultural, pharmaceutical, food processing, and medical. Available in 6mm, 8mm, and 10mm configurations between 10 and 100 pound output force.
The Ni-Slide series carries Attwood's widest selection of configurations and lengths. These gas springs are the industry's proven leader in value, quality, and durability.
Gas Springs: OEM Gas SpringsOutput Force: 90 PoundsExtended: 36.30 InchesProduct Series: Ni-SlideCompressed: 21.10 InchesStroke: 15.20 InchesEnd Type: 10mm SocketShock Size: 10mm Rod x 22mm Cylinder
Alternate part number: SL-29-90-1, Spring Lift
Normalized SKU: SL29901UPC Code: 715584029902Search Key: ATT-SL29-Package Type: Bulk - Not packaged
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Attwood Marine
Attwood Gas Spring 20 lb Extended 17.2" Compressed 10.2" #SL36-20-5
$20.69
$29.32
Attwood Marine SL36-20-5 Gas SpringsNi-Slide Series Attwood gas springs are made with bio-degradable no hazzard to water grade oil (WGK), making them the marine industry's most environmentlly friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Attwood gas springs come has many configurations to fit your needs including: marine, industrial, agricultural, pharmacuetical, food processing, and medical. Available in 6mm, 8mm and 10mm configurations between 10 and 100 pound output force.The Ni-Slide series carries Attwood's widest selection of configurations and lengths. These gas springs are the industry's proven leader in value, quality and durability.Gas Springs: Aftermarket Gas SpringsOutput Force: 20 PoundsExtended: 17.20 InchesProduct Series: Ni-SlideCompressed: 10.20 InchesStroke: 7.00 InchesEnd Type: 10mm SocketShock Size: 8mm Rod x 18mm CylinderAlternate part number: SL-36-20-5, Spring LiftSpecifications:Important Notice: Gas Spring Disposal Do not discard oil-filled Gas Springs!It is easy to drain this hydraulic oil and recycle it in the same manner as motor oil or transmission fluid.Follow these instructions to remove the oil:
Gas Springs are under pressure. Work carefully and wear eye protection!
Clamp Gas Spring in a vise.
Screen off the work area to deflect escaping gas and oil splashes. Have a container ready to collect oil.
Use a 1/8" (3mm) drill bit to drill a hole 3/4" (20mm) from bottom end of the Gas Spring. Hole must be 3/8" (10mm) deep.
Drain oil by pumping the piston rod in and out several times.
Collect and dispose of the oil and Gas Spring according to local disposal and environmental regulations.
Normalized SKU: SL36205UPC Code: 715584036207Search Key: ATT-SL36-Package Type: Aftermarket Packaging
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Attwood Marine
Attwood Gas Spring 36" x 21" C 150#13mm #SL29-150-1
$31.39
$37.46
Attwood Marine SL29-150-1 Gas SpringsThis Attwood Special Order item is only offered in a full case quantity. Attwood no longer allows for less than case quantity orders.Ni-Slide Series Attwood gas springs are made with bio-degradable no hazzard to water grade oil (WGK), making them the marine industry's most environmentlly friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Attwood gas springs come has many configurations to fit your needs including: marine, industrial, agricultural, pharmacuetical, food processing, and medical. Available in 6mm, 8mm and 10mm configurations between 10 and 100 pound output force.The Ni-Slide series carries Attwood's widest selection of configurations and lengths. These gas springs are the industry's proven leader in value, quality and durability.Gas Springs: OEM Gas SpringsOutput Force: 150 PoundsExtended: 36.30 InchesProduct Series: Ni-SlideCompressed: 21.10 InchesStroke: 15.20 InchesEnd Type: 10mm SocketShock Size: 10mm Rod x 22mm CylinderAlternate part number: SL-29-150-1, Spring LiftNormalized SKU: SL291501UPC Code: Search Key: ATT-SL29-Package Type: Bulk - Not packaged
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Attwood Marine
Attwood SS Gas Spring 8mm Ext 20" Comp 12" #ST34-120-5
$42.58
$74.18
Attwood Marine ST34-120-5 Gas SpringsAttwood INOX Stainless Standard Series. Stainless Steel shell and rod ensure corrosion-resistance and up to 30% lower cost than traditional Stainless springs. All Stainless Standard Series springs come with high-strength, corrosion-proof composite end fittings.Gas Springs: Aftermarket Gas SpringsOutput Force: 120 PoundsExtended: 20.00 InchesProduct Series: Stainless StandardCompressed: 12.00 InchesStroke: 8.00 InchesEnd Type: 10mm SocketShock Size: 8mm Rod x 18mm CylinderAlternate part number: ST-34-120-5Specifications:Important Notice: Gas Spring Disposal Do not discard oil-filled Gas Springs!It is easy to drain this hydraulic oil and recycle it in the same manner as motor oil or transmission fluid.Follow these instructions to remove the oil:
Gas Springs are under pressure. Work carefully and wear eye protection!
Clamp Gas Spring in a vise.
Screen off the work area to deflect escaping gas and oil splashes. Have a container ready to collect oil.
Use a 1/8" (3mm) drill bit to drill a hole 3/4" (20mm) from bottom end of the Gas Spring. Hole must be 3/8" (10mm) deep.
Drain oil by pumping the piston rod in and out several times.
Collect and dispose of the oil and Gas Spring according to local disposal and environmental regulations.
Normalized SKU: ST341205UPC Code: 022697341259Search Key: ATT-ST34-Package Type: Aftermarket Packaging
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Attwood Marine
Attwood Gas Spring 26.3" #SL37-70-1
$29.49
Attwood Marine SL37-70-1 Gas SpringsNi-Slide Series Attwood gas springs are made with bio-degradable no hazzard to water grade oil (WGK), making them the marine industry's most environmentlly friendly gas springs. All springs pass ASTM B117, Attwood salt spray and a 30,000 cycle lifecycle test. Attwood gas springs come has many configurations to fit your needs including: marine, industrial, agricultural, pharmacuetical, food processing, and medical. Available in 6mm, 8mm and 10mm configurations between 10 and 100 pound output force.The Ni-Slide series carries Attwood's widest selection of configurations and lengths. These gas springs are the industry's proven leader in value, quality and durability.Gas Springs: OEM Gas SpringsOutput Force: 70 PoundsExtended: 26.30 InchesProduct Series: Ni-SlideCompressed: 16.10 InchesStroke: 10.20 InchesEnd Type: 10mm SocketShock Size: 8mm Rod x 18mm CylinderAlternate part number: SL-37-70-1, Spring LiftSpecifications:Important Notice: Gas Spring Disposal Do not discard oil-filled Gas Springs!It is easy to drain this hydraulic oil and recycle it in the same manner as motor oil or transmission fluid.Follow these instructions to remove the oil:
Gas Springs are under pressure. Work carefully and wear eye protection!
Clamp Gas Spring in a vise.
Screen off the work area to deflect escaping gas and oil splashes. Have a container ready to collect oil.
Use a 1/8" (3mm) drill bit to drill a hole 3/4" (20mm) from bottom end of the Gas Spring. Hole must be 3/8" (10mm) deep.
Drain oil by pumping the piston rod in and out several times.
Collect and dispose of the oil and Gas Spring according to local disposal and environmental regulations.
Normalized SKU: SL37701UPC Code: Search Key: ATT-SL37-Package Type: Bulk - Not packaged
Frequently Asked Questions
First Choice Marine is an online marine retailer carrying a diverse line of marine parts and accessories and related items from industry-respected and demanded manufacturers and suppliers. Through our diverse distributor network, we are able to access over 150,000 items, including our current site inventory, new products being added, and special order items. If you need it on your boat... we are your one-stop shop!
Yes, we offer FREE Shipping on most orders over $149 to US-48*.
Each product displays a shipping status message, just above the item price. Below is the meaning for each of these codes.
- Qualifies for Free Shipping: This item qualifies for free shipping when the order is $149+
- Qualifies for Free Ground Shipping: This item qualifies for free ground shipping when the order is $149+.
- Oversized - Not Qualified for Free Shipping: This item is too large/heavy to qualify for free shipping
- Hazardous Item - Not Qualified for Free Shipping: This item is hazardous and does not qualify for free shipping
- Truck Freight - Not Qualified for Free Shipping: This item has to be shipped via truck freight. Please contact us for a quote
- In-Store Pickup Only: This item can only be picked up in our Grain Valley, MO retail store
Below the price of the item, on the product page, there is a message indicating the availability of the product.
The quantity on hand is updated as inventory events happen and matches what we have available. If you have urgent needs and we are close to what you need, contact us, and we can confirm stock.
We offer a hassle-free return policy. If you're not completely satisfied with your purchase, you can return it within 30 days for a full refund or exchange.
If you need to return an item, please follow the guidelines here so we can process a prompt refund and assist you in finding the correct item.
Free Shipping
On most orders $149+ to the continental 48 US states.Secure Shopping
Fast, secure checkout with a variety of payment methods.Shop with confidence
25+ years serving the marine industry.Support center
Need help? Contact us via live chat, phone, or email.