-
Vendor: DetMarDetMar 12-1103C Deck Chairs & TablesDetmar offers table tops in an attractive ivory finish. They are offered in two different shapes: rectangular and octagonal. The table tops are molded from high-impact plastic for durability and protection from the sun, saltwater and cleansers. Clean up...
- Regular price
- $50.93
- Regular price
-
$61.11 - Sale price
- $50.93
- Unit price
- per
Save $10.18 -
Vendor: DetMarDetMar 12-1127 Deck Chairs & TablesRecessed Flush Mount - Molded of high impact plastic, receptacle once installed is flush to floor. Base measures 6-1/2" in diameter with a 1-5/8" recess. Table leg hole has molded-in plug eliminating need to cap hole when leg is...
- Regular price
- $16.80
- Regular price
-
$20.05 - Sale price
- $16.80
- Unit price
- per
Save $3.25 -
Vendor: DetMarDetMar 121132P Railing & FittingsMolded of high impact plastic, with a soft leather grip which won't corrode or discolor in harsh marine environments. Mounts by bolting two 1/4" pan or round head machine screws. Once installed, decorative caps snap over mount holes so no...
- Regular price
- $13.55
- Regular price
-
$16.17 - Sale price
- $13.55
- Unit price
- per
Save $2.62 -
Vendor: DetMarDetMar 12-1131 Deck Chairs & TablesTwo table tops are offered, rectangular (16"x28") or octagonal (8-sided 20" across) shapes, both molded from high-impact plastic for durability and corrosion resistance to sun, salt water and solvents. Clean-up can be done with soap and water. For easy...
- Regular price
- $8.57
- Regular price
-
$10.23 - Sale price
- $8.57
- Unit price
- per
Save $1.66 -
Vendor: DetMarDetMar 7-5-4C BlowersTunnel blowers for galley, head or the engine compartment ventilation. Capacity range 138 CFM (3.97 CuM/Min) for the 3" intake, and 3" exhaust model to 223CFM (6.32 CuM/Min) for the 4" intake, 4" exhaust model. All are ignition protected, NMMA approved and...
- Regular price
- $38.53
- Regular price
-
$45.99 - Sale price
- $38.53
- Unit price
- per
Save $7.46 -
Vendor: DetMarDetMar 7-5-1C BlowersTunnel blowers for galley, head or the engine compartment ventilation. Capacity range 138 CFM (3.97 CuM/Min) for the 3" intake, and 3" exhaust model to 223CFM (6.32 CuM/Min) for the 4" intake, 4" exhaust model. All are ignition protected, NMMA approved and...
- Regular price
- $36.69
- Regular price
-
$43.79 - Sale price
- $36.69
- Unit price
- per
Save $7.10 -
Vendor: DetMarDetMar 10-15-11P RiggingFor sealed pass-thru of cables, wires and fuel lines. Molded of durable vinyl that resists flex fatigue, gasoline, oil, and U.V. Easily installed with #8 fasteners. Molded-in, tabbed, tear-proof slots provide over 2.5" diameter of open area for cable access without the...
- Regular price
- $7.31
- Regular price
-
$8.60 - Sale price
- $7.31
- Unit price
- per
Save $1.29 -
Vendor: DetMarDetMar 3-3-1 Glove BoxesDet Mar's glove box offers contemporary styling and conveniences. With push-button lock and two keys, you can keep valuables in a safe place. When lid is open, it provides a handy serving tray for beverages. Overall dimensions: 4-3/8" high, 11-7/8" wide,...
- Regular price
- $31.47
- Regular price
-
$37.56 - Sale price
- $31.47
- Unit price
- per
Save $6.09 -
Vendor: DetmarDetmar 12-1405P Handles & PullsErgonomic, contoured design with a leather grain finish. 1/4" - 20 stainless steel mount studs are insert molded into the handle to eliminate loose caps. Soft Grip: 9-1/2" L x 2-5/16" H x 1-3/16" W. 1-1/2" finger clearance. Soft Grip...
- Regular price
- $17.47
- Regular price
-
$20.85 - Sale price
- $17.47
- Unit price
- per
Save $3.38 -
Vendor: DetmarDetmar 12-1400P Handles & PullsErgonomic, contoured design with a leather grain finish. 1/4" - 20 stainless steel mount studs are insert molded into the handle to eliminate loose caps. Hard Grip: 9-1/4" L x 2-1/4" H x 15/16" W. 1-5/8" finger clearance. Hard Grip...
- Regular price
- $12.38
- Regular price
-
$14.78 - Sale price
- $12.38
- Unit price
- per
Save $2.40 -
Vendor: DetmarDetmar 12-1401P Handles & PullsErgonomic, contoured design with a leather grain finish. 1/4" - 20 stainless steel mount studs are insert molded into the handle to eliminate loose caps. Soft Grip: 9-1/2" L x 2-5/16" H x 1-3/16" W. 1-1/2" finger clearance. Soft Grip...
- Regular price
- $7.78
- Regular price
-
$9.29 - Sale price
- $7.78
- Unit price
- per
Save $1.51 -
Vendor: DetmarDetmar 12-1403P Handles & PullsErgonomic, contoured design with a leather grain finish. 1/4" - 20 stainless steel mount studs are insert molded into the handle to eliminate loose caps. Soft Grip: 9-1/2" L x 2-5/16" H x 1-3/16" W. 1-1/2" finger clearance. Soft Grip...
- Regular price
- $17.31
- Regular price
-
$20.66 - Sale price
- $17.31
- Unit price
- per
Save $3.35 -
Vendor: DetMarDetMar 2-28-1 Steering WheelsTunnel blowers for galley, head or the engine compartment ventilation. Capacity range 138 CFM (3.97 CuM/Min) for the 3" intake, and 3" exhaust model to 223CFM (6.32 CuM/Min) for the 4" intake, 4" exhaust model. All are ignition protected, NMMA approved...
- Regular price
- $21.11
- Regular price
-
$25.20 - Sale price
- $21.11
- Unit price
- per
Save $4.09 -
Vendor: DetMarDetMar 3-3-1C Glove BoxesMolded high impact plastic with textured hinged lid and stainless steel pins. Push button lock with 2 keys. In open position, lid serves as beverage holder. Door 13-1/2”L x 5-1/2”H, box dimensions 11-7/8”L x 4-3/8”H x 6-3/4”D, Installation hole size 12-1/8”L...
- Regular price
- $51.11
- Regular price
-
$61.33 - Sale price
- $51.11
- Unit price
- per
Save $10.22 -
Vendor: DetMarDetMar 12-1109C Deck Chairs & TablesDetmar's removable table kits permit quick and easy setup in virtually any boat or RV camper. Both rectangular and octagonal shapes are molded from high-impact plastic for durability and protection from the sun, salt water and cleansers. Clean up...
- Regular price
- $95.64
- Regular price
-
$118.73 - Sale price
- $95.64
- Unit price
- per
Save $23.09